7 February 2012 | Contact us | Site map | Member Login

Cranes Association of New Zealand.

Useful Sites

Information for crane users / site managers »»

Information for crane owners / managers »»

Information for crane operators / trainees »»

Crane Association of New Zealand (Inc.)

Technical information

Information for crane users / site managers

Site owner’s hazard identification check sheet

Under the Health and Safety in Employment Act, site owners have a responsibility to identify and deal with hazards on the sites they control.

You can expect the crane hire company and the crane operator to be proactive in safety and hazard management. However safety in crane operations on your site is a shared responsibility.

Working through the follow check sheet before the crane arrives will assist in minimizing the risks and help the crane operator to complete the task safely and efficiently.

The Crane Association recommends you print this copy for use on the job

Check items

Yes

No

N/A

Has your team been advised when the crane will be working on site?      
Is the ground area cleared and prepared for the crane?      
The area has been checked for buried service such as drains and water mains may      
The weight of the loads to be lifted are confirmed      
A trained and competent dogger is available to sling loads and direct the crane      
Warning tape and any necessary holders are available to keep people clear of operational area of the crane.      
Crane operations will not come closer than 4 meters to any power lines.      
Loads will not have to be carried over people or other machines      
The weather suitable for the intended tasks      
The dogger can maintain line of sight with the crane operator.      
Noise level is okay for verbal communications      
Radios, if applicable, can be operated on an interference free channel.      
General public is not at risk      
Permits, if applicable,  have been obtained      

Disclaimer
Copyright © Crane Association of New Zealand (Inc.) 2006

Top